= Talking to hboot - and the AT-Command processor =
== start hboot ==
Start hboot by holding the Vol-Down Key while powering on the phone.

== start rtask c in hboot ==

Plug your phone into your computer, and in a terminal, type the following:

On your computer:
{{{
sudo modprobe -r usbserial
sudo modprobe usbserial vendor=0x0BB4 product=0x0C94
sudo screen /dev/ttyUSB0

rtask c
}}}

This will terminate your console session and change the USB-ID of your phone.

== Talking to the AT-command processor ==
Attach the serial to the new USB-device

On your computer:
{{{
sudo modprobe -r usbserial
sudo modprobe usbserial vendor=0x05c6 product=0x9002
sudo screen /dev/ttyUSB2
}}}

The following is an example to verify radio S-OFF. The commands are mixed with the answers. You only type the commands the start with AT.
{{{
ATE1
ATV1
AT@CID?
@CID: 11111111

OK
AT@SIMLOCK?AA
@secu_flag: 0

AT@SIMLOCK?40
@SIMLOCK: 00

OK
}}}