== Mycroft Mark II ==

=== body / case ===
The original mark2 body at [https://github.com/MycroftAI/hardware-mycroft-mark-II-rpi] was not printable on my FDM printer.
So I used this: [https://community.mycroft.ai/t/simplified-mark-ii-body-for-fdm-printing/8248/12] or [https://github.com/guhl/hardware-mycroft-mark-II-rpi]

=== Software basis ===
I used the picroft image Picroft_Buster-Keaton_2020-01-10.img as the software basis

=== Audio ===
I had two problems related to audio.

First the volume of the Adafruit MAX9744 Amplifier was very high and resulted in a general cracking and static noise when switched on.

And in addition the volume control did not influence the volume of the Mycroft output

[wiki:mycroft_mark-2_sound Mycroft Mark II - Sound]

[wiki:mycroft_mark-2_spotify Mycroft Mark II - Spotify using Pulseaudio]